
آزمون ENCOR (نسخه 1.1) توسط سیسکو بهروزرسانی شده است تا محتوای جدید و نسخه بهروزشده را پوشش دهد. این دوره اولین گام برای تسلط بر تکنولوژیهای هستهای شبکه است. هدف از این دوره آموزشی ، ارائه مهارتهایی به دانشجویان است که برای نصب، مدیریت و اداره فناوریهای دوگانه پشته (Dual Stack)، امنیت شبکه و خودکارسازی در محیطهای سازمانی لازم است.
مهارتهای آموخته شده دوره ENCOR
پس از تکمیل این دوره آموزشی ، دانشجویان مهارتهای زیر را خواهند آموخت:
- پروتکلهای مسیریابی: GRE، VLANs، RSTP، MST، NTP، IPSec
- مدیریت و پیکربندی دستگاهها: شامل VPNها و خودکارسازی شبکه
- امنیت: درک پروتکلهای مختلف امنیتی در زمینه شبکههای سازمانی
این دوره برای افراد در نقشهای زیر مناسب است:
- مهندسان شبکه
- تکنسینهای شبکه
- مهندسان پشتیبانی
- مهندسان سیستم
- تحلیلگران شبکه
مهارتهای مورد نیاز:
- پیکربندی اصول شبکه، شامل توانایی برقراری اتصال اینترنت، LAN و WAN با استفاده از IPv4 و IPv6
- عملیات و پشتیبانی از یک شبکه LAN متوسط که دارای چندین سوئیچ است، شامل VLANها، trunking و عملکرد spanning tree
- عیبیابی مشکلات اتصال IPv4 و IPv6
- پیکربندی و عیبیابی OSPF برای هر دو IPv4 و IPv6
- مدیریت امنیت دستگاههای شبکه، پیکربندیهای دستگاههای Cisco، تصاویر Cisco IOS و مجوزها. آشنایی با تکنولوژیهای internetworking و توانایی انجام پیکربندیهای پایه روتر
لیست مطالب مطرح شده در دوره Cisco CCNP Enterprise ENCOR v1.1
01. معماری پردیس و اصول دستگاهها
– Campus Architecture
– Device Architecture
02. ویژگیها و خدمات لایه دسترسی و توزیع
– پیکربندی و تأیید VLANها
– پیکربندی و تأیید Trunks
– پروتکل VTP (VLAN Trunking Protocol)
– بررسی اجمالی و الگوریتم STP
– همگامسازی STP، پیکربندی و دستکاری
– STP PortFast و BPDU Guard
– پروتکل MSTP (Multiple Spanning Tree Protocol)
– EtherChannels
– مسیریابی بین VLANها (Inter-VLAN Routing)
– پروتکل FHRP (First-Hop Redundancy Protocol)
03. مسیریابی
– معرفی مسیریابی
– بررسی اجمالی مسیریابی پویا
– بررسی اجمالی OSPFv2، بستهها، حالتها و طراحی
– پیکربندی و تأیید OSPFv2
– انواع شبکههای OSPFv2 و انتخابات DR/BDR
– LSAs و متریکهای OSPFv2
– خلاصهسازی OSPFv2
– فیلتر کردن OSPFv2
– بررسی اجمالی EBGP، پیکربندی و تأیید
– فرآیند انتخاب بهترین مسیر BGP
– پیکربندی و تأیید NAT (Network Address Translation)
– بررسی اجمالی پروتکل Multicast
04. VPNها
– پیکربندی و تأیید GRE Tunnel
– معرفی IPSec
– پیکربندی و تأیید IPSec Site-to-Site VPN Tunnel
– پیکربندی و تأیید GRE over IPSec Tunnel
– پیکربندی و تأیید VRF (Virtual Routing and Forwarding)
05. پروتکلها و خدمات مدیریت
– پیکربندی و تأیید NTP
– پیکربندی و تأیید Syslog
– دیباگها، دیباگهای شرطی، Ping و Traceroute
– پیکربندی و تأیید SNMP
– پیکربندی و تأیید NetFlow / Flexible NetFlow
– پیکربندی و تأیید SPAN، RSPAN، ERSPAN
– پیکربندی و تأیید IPSLA
– بررسی اجمالی QoS (Quality of Service)
– پیکربندی Embedded Event Manager (EEM)
06. امنیت
– پیکربندی و تأیید دسترسی به دستگاه، احراز هویت
– پیکربندی و تأیید AAA
– لیستهای کنترل دسترسی (ACLs)
– کنترل Plane Policing (CoPP)
– فایروالهای نسل جدید، کنترل دسترسی شبکه، MACSec و TrustSec
07. شبکههای پردیس نسل بعد
– SD-Access
– LISP و VXLAN
– SD-WAN
– بررسی اجمالی DNA Center
– فرمتهای داده
– مدلسازی دادهها
– NetConf / RestConf
– آمادهسازی امتحان Python
– Chef، Puppet، Ansible، SaltStack
این آموزش برای کسانی طراحی شده است که به دنبال کسب یا ارتقای تخصص خود در تکنولوژیهای شبکه سازمانی هستند و میخواهند شانس خود را برای قبولی در آزمون ENCOR افزایش دهند.
لینک دانلود دوره آموزشی StormWind – Cisco CCNP Enterprise ENCOR v1.1
حجم: 28.3 گیگابایت
دانلود – بخش اول
دانلود – بخش دوم
دانلود – بخش سوم
دانلود – بخش چهارم
دانلود – بخش پنجم
دانلود – بخش ششم
دانلود – بخش هفتم
دانلود – بخش هشتم
دانلود – بخش نهم
دانلود – بخش دهم
دانلود – بخش یازدهم
دانلود – بخش دوازدهم
دانلود – بخش سیزدهم
دانلود – بخش چهاردهم
دانلود – بخش پانزدهم
دانلود – بخش شانزدهم
دانلود – بخش هفدهم
دانلود – بخش هیجدهم
دانلود – بخش نوزدهم
دانلود – بخش بیستم
دانلود – بخش بیست یکم
دانلود – بخش بیست دوم
دانلود – بخش بیست سوم
دانلود – بخش بیست چهارم
دانلود – بخش بیست پنجم
دانلود – بخش بیست ششم
دانلود – بخش بیست هفتم
دانلود – بخش بیست هشتم
دانلود – بخش بیست نهم
GRE over IPSec Tunnel Configuration and Verification
Date: 2024
Duration: 16h 30m
Publisher: StormWind
Format: Video MP4 + Subtitle
By: Raymond Lacoste, CompTIA, Cisco, Cybersecurity, Security Awareness, AWS, ISC2, End-User Training
Overview
The CCNP Enterprise: ENCOR v1.1 course is the first step to mastering the implementation of core enterprise network technologies. The goal of this online training course is to provide students with the skills needed to install, manage, and administer dual stack architecture, virtualization, network assurance, security, and automation in an enterprise network.
Exam Number: 350-401 ENCOR
Skills Learned
After completing this online training course, students will be able to:
-
Configuration of VRF, GRE, VLANs, RSTP, MST, NTP, IPSec VPNs, and more!
-
Advanced Routing
-
Configure and verify device management
-
Cisco DNA Center
-
Examine threat defense, endpoint security, and introduction to the Next-Generation Firewall
This instructor-led training course is meant for:
- Network engineers
- Network technicians
- Support engineers
- Systems engineers
- Network analysts
- Network administrators
- Those looking to attain their CCNP Enterprise certification and prepare for the CCIE Enterprise
Cisco Certified Network Associate (CCNA) certification is highly recommended
Knowledge of the following:
- Configure network fundamentals, including the ability to establish Internet, LAN, and WAN connectivity using both IPv4 and IPv6
- Operate and support a medium-sized LAN that has multiple switches, including VLANs, trunking, and spanning tree functionality
- Troubleshoot IPv4 and IPv6 connectivity issues
- Configure and troubleshoot OSPF, for both IPv4 and IPv6
- Manage network device security, Cisco device configurations, Cisco IOS images, and licenses. Familiarity with internetworking technologies and the ability to perform basic router configuration
01. Campus Architecture and Device Fundamentals
Campus Architecture
Device Architecture
02. Access and Distribution Layer Features and Services
Configuring and Verifying VLANs
Configuring and Verifying Trunks
VLAN Trunking Protocol (VTP)
STP Overview and Algorithm Deep Dive
STP Convergence, Configuration and Manipulation
STP PortFast, and BPDU Guard
Multiple Spanning Tree Protocol (MSTP)
EtherChannels
Inter-VLAN Routing
First-Hop Redundancy Protocol (FHRP)
03. Routing
Routing Introduction
Dynamic Routing Overview
OSPFv2 Overview, Packets, States, and Design
OSPFv2 Configuration and Verification
Text BoxOSPFv2 Network Types and DR/BDR Election
OSPFv2 LSAs and Metric
OSPFv2 Summarization
OSPFv2 Filtering
EBGP Overview, Configuration and Verification
Text BoxShapeBGP Best Path Selection Process
Network Address Translation (NAT)
Multicast Protocol Overview
04. VPNs
GRE Tunnel Configuration and Verification
IPSec Introduction
IPSec Site-to-Site VPN Tunnel Configuration and Verification
GRE over IPSec Tunnel Configuration and Verification
Virtual Routing and Forwarding (VRF)
05. Management Protocols and Services
NTP Configuration and Verification
Syslog Configuration and Verification
Debugs, Conditional Debugs, Ping, and Traceroute
SNMP Configuration and Verification
NetFlow / Flexible NetFlow Configuration and Verification
SPAN, RSPAN, ERSPAN Configuration and Verification
IPSLA Configuration and Verification
Quality of Service (QoS) Overview
Embedded Event Manager (EEM) Configuration
06. Security
Device Access, Authentication Configuration and Verification
AAA Configuration and Verification
Access Control Lists (ACLs)
Control Plane Policing (CoPP)
Next-Gen Firewalls, Network Access Control, MACSec, and TrustSec
07. Next Generation Campus Networks
SD-Access
LISP and VXLAN
SD-WAN
DNA Center Overview
Data Formats
Data Modeling
NetConf / RestConf
Python Exam Prep
ShapeChef, Puppet, Ansible, SaltStack
Thank you for subscribing to the course, please put the nsx course on the site